Blind Size Calculator
Blind Size Calculator
Calculate the perfect blind or shade size for your window — supports inside/outside mount, uses standard global measuring rules for accurate fit on blinds, roller shades, verticals & more.
Blind Size Calculator: How to Measure Your Windows for the Perfect Fit
When it comes to window treatments, getting the right blind size is critical. Too small, and it leaves gaps letting light in; too large, and it looks bulky or doesn’t fit properly. That’s where the Blind Size Calculator comes in—a practical, easy-to-use tool that helps homeowners, interior designers, and DIY enthusiasts determine the precise dimensions for their blinds or shades. Whether you’re fitting roller shades, vertical blinds, or standard horizontal blinds, this tool ensures your measurements are accurate and hassle-free.
Why Accurate Blind Measurements Matter
Imagine ordering a blind that’s 2 cm too wide for your window. The installation becomes difficult, the blind might not roll smoothly, and the aesthetic is compromised. Similarly, blinds that are too narrow leave unsightly light gaps and reduce privacy. By using a Blind Size Calculator, you can:
-
Avoid measurement errors that lead to returns or custom remakes.
-
Ensure perfect fit for inside mount and outside mount blinds.
-
Save time and money by ordering the correct size the first time.

How the Blind Size Calculator Works
The calculator is designed to simplify window measurement by considering both width and height variations, as most windows aren’t perfectly square. Here’s a breakdown of its functionality:
Inputs
-
Mount Type:
-
Inside Mount – Blinds fit within the window frame; a small deduction is applied for clearance.
-
Outside Mount – Blinds cover the frame and wall, adding overlap to block light effectively.
-
-
Measurement Unit: Centimeters (cm) or Inches.
-
Window Width Measurements: Top, middle, and bottom points.
-
Window Height Measurements: Left and right points.
Outputs
-
Recommended Blind Width and Height: Calculated by applying mount-specific adjustments.
-
Raw Measurements: Shows the narrowest width and longest height.
-
Window Squareness Check: Advises if slight adjustments are needed.
Calculation Logic
-
Determine Width and Height:
-
Adjust Based on Mount Type:
-
Inside Mount: Deduct ~0.5–1 cm (or ¼–½ inch) total to allow smooth installation.
-
Outside Mount: Add 5–10 cm (or 2–4 inches) total for better light blocking and frame coverage.
-
-
Check Squareness:
Step-by-Step Examples
Example 1: Inside Mount for a Slightly Irregular Window
-
Width Top: 120 cm
-
Width Mid: 119.5 cm
-
Width Bottom: 119 cm
-
Height Left: 150 cm
-
Height Right: 149.5 cm
Calculation:
-
Narrowest width = 119 cm
-
Longest height = 150 cm
-
Deduction for inside mount = 1 cm
Recommended Blind Size: 118 × 150 cm
-
Squareness check: Slight variation – use narrowest/tallest dimensions
Example 2: Outside Mount for Full Coverage
-
Width Top: 100 cm
-
Width Mid: 101 cm
-
Width Bottom: 100.5 cm
-
Height Left: 140 cm
-
Height Right: 139 cm
Calculation:
-
Narrowest width = 100 cm
-
Longest height = 140 cm
-
Added overlap = 10 cm
Recommended Blind Size: 110 × 150 cm
-
Squareness check: Slight variation, overlap covers discrepancies
Example 3: Measuring in Inches
-
Width Top: 50 in
-
Width Mid: 49.5 in
-
Width Bottom: 49 in
-
Height Left: 60 in
-
Height Right: 59.5 in
-
Mount Type: Inside
Calculation:
-
Blind Width = 49 in – 0.5 in = 48.5 in
-
Blind Height = 60 in
Recommended Blind Size: 48.5 × 60 in
Practical Tips for Accurate Measurements
-
Always measure in three places for width and two for height; windows often are slightly irregular.
-
Round width down and height up to nearest 0.1 cm or inch for custom orders.
-
Check frame depth for inside mounts; usually 2.5–5 cm (1–2 in) is required.
-
Bay or arched windows require separate measurements for each section.
-
Avoid obstacles such as handles or cranks inside the window frame.
Related Tools to Improve Home Efficiency
-
Energy Use Intensity Calculator – Estimate energy use in your home.
-
Electricity Cost Calculator – Track and optimize electricity consumption.
-
Gas vs Electric Dryer Calculator – Decide which dryer is more efficient for your home.
-
Generator Wattage Calculator – Determine the correct generator size for your appliances.
FAQs
1. Can I use the calculator for arched or bay windows?
Yes, measure each section separately. The tool works best for rectangular windows but can guide you for irregular shapes by calculating each segment individually.
2. What if my window isn’t square?
The calculator automatically identifies the narrowest width and tallest height, giving a recommended blind size that ensures proper coverage despite slight irregularities.
3. Is there a difference between inside and outside mount measurements?
Yes. Inside mounts deduct a small clearance for smooth operation, while outside mounts add extra overlap to cover the frame and block light effectively.
Conclusion
The Blind Size Calculator takes the guesswork out of measuring windows. By providing precise recommendations, squareness checks, and practical advice, it ensures your blinds fit perfectly—saving time, money, and frustration. Whether you are a DIY enthusiast or a professional installer, testing different mount types and measurements in the calculator allows you to make informed decisions.
Try the tool now to get the perfect blind size and explore related home efficiency calculators to optimize every aspect of your living space.
